1. Welcome
This guide will walk you step-by-step through the process of setting up and injecting the tool for Rust. Follow each step carefully to ensure success. If you encounter any issues, troubleshooting tips are included.
2. Choose Your Overlay
To begin, you need to choose between two options. Select and download one of the following programs based on your preference:
Make sure to install your selected program before proceeding.
3. Download the Loader
Next, you'll need to download the loader. Follow these instructions:
Download the loader below
Then put it on a USB Drive (Recommended)
Download the loader Here.
4. Windows Defender
To ensure your antivirus doesn't interfere with the cheat, which can cause problems, we recommend that you disable it using Defender Control.
Either you can manually temporarily disable it by disabling real-time protection
Or you can download Defender Control Here.
5. Launch the Loader
With the Overlay Installed and the loader downloaded follow these intructions:
Locate the loader file you downloaded earlier.
Double-click the file to open it.
6. Insert the Key
When prompted, insert your product key:
Copy our product key from the Email.
Paste it into the License Key Input.
Click Log In to proceed.
7. Inject the Product
Now that you've activated the loader, you can inject the product:
In the Loader, press the Load Button.
Follow on Section 8 for futher instructions.
If you encountered and error please scroll to section 10
8. Open SteelSeries or NVIDIA as Admin
Depending on your earlier choice, launch SteelSeries or NVIDIA with administrator privileges:
Close Steelseries or Nvidia fully.
Then Launch it with Administrator.
9. Open Rust
The Loader will show some downloading animations and then close. If it closes that means you can open Rust Now. If you encountered any Issues scroll to section 10
10. Troubleshooting
If you encounted any error messages please follow instructions below:
Click Here and try to fix the problems.
If you cannot fix the issues please click Here and open a ticket.